Multiform Tubes Engineering Ltd has specialised in adapting tubing for a long time. We have years of experience offering services like mild steel automotive tube reduction. Because of this, we can produce tubes for all kinds of purposes. Even better, our services are cost effective. It means that everyone can work with us.
How does it work?
Tube reduction is a process that’s similar to tube tapering. Here, you reduce the size of the tube gradually towards its end. We normally do it with hydraulic end formers or rotary reducing mechanisms so we can deliver the best results.
Rotary reduction has its benefits. For instance, there isn’t any interruption to the grain structure. What this does is ensure there’s no loss in integral strength. Rotary reduction can tube layer as well. Here, you reduce tubes of differing materials together. As a result, you can increase different characteristics and maximise performance.
Hydraulic end forming employs a static forming die together with clamps. It can form tubes that are up to a 5.5″ diameter. With both practices, wall thicknesses can reach 5mm. This is unless you’re doing reduction via hot rotary; the thickness can be higher here because heating the tube can make it more malleable.
A versatile material
Steel is one of the most versatile materials. As a result, it’s used in multiple industries. Services like mild steel automotive tube reduction really help here, adapting the tubes for various needs.
Within the automotive industry, mild steel tubes tend to be part of truck and car manufacturing. They can work for a number of applications, including chassis, suspensions, and more.
One specific application of steel tubing in motors is the exhaust system. In fact, it’s an obvious application for petrol, diesel, and hybrid vehicles. It works to safeguard drivers and passengers from the dangerous gases they generate by burning fuel. However, fully electric vehicles tend to not have exhausts.
Another use for steel tubes here is as sway bars. They make up part of a car’s suspension system. The bars make certain it doesn’t roll excessively when turning. Apart from this, they ensure alignment stability by ensuring the wheels don’t become lopsided. Both advantages give drivers superior traction on the road. A motor’s suspension system is made up of joints, bushings, links, shocks, steering controls, springs, and wheels. If a car sways or leans too much when moving, you’re more likely to lose control. It therefore increases the chance of a crash. Let us know if you need the greatest services for mild steel automotive tube reduction.
You can also use the tubes in prop shafts. These transfer torque from the transmission to the differential. Transmitting it to the wheels allows the vehicle to move. Torque is a twisting force that results in rotation. Typically, the more torque you have, the more power your engine generates. The transmission is representative of your control over the vehicle’s movement. As for the differential, it enables the wheels to turn at individual speeds to ease turn and motion.
The CV joint makes use of tubing too. It is a vital component because it links the driveshaft and wheels. Mainly for front-wheel drive vehicles, it is also viable for rear-wheel and four-wheel drive too. The outer CV joint links the drive shaft to your wheels. These connections allow you to drive the wheels at constant speeds while accommodating the suspension’s bounce. Without these joints, the car cannot run.
Work with our team if you need mild steel automotive tube reduction
Multiform Tubes Engineering Ltd has what it takes to transform metal tubing in all sorts of interesting ways. Thanks to services like tube reduction, bending, and more, you’ll have what you need for various vehicles. We offer superior quality of work as well as stellar customer service.
So, if you’d like to do business with us to arrange mild steel automotive tube reduction or other services, feel free to get in touch. We can give you more details about everything we can do if you have any queries.