Altering the ends of tubes is necessary for various applications. For example, it is vital to make sure you can create strong connections and transitions. However, you need to ensure you choose the right method. This could be tube swaging, beading, reduction, flaring, or even cutting and machining. It’s important to consider your needs and select the right process. Critically, you also need to know the limits of each. We want to have a look at swaging’s limitations here, so read on to learn more.
How does it work?
Swaging is a really useful way to alter the end of a section of tube. Notably, it creates a taper, reducing the OD accurately without a loss of material. The process causes work hardening, improving the fatigue resistance and providing more protection against cyclic loading.
There are two main ways to swage the tubing. The most common is rotary swaging. A rotating die uniformly reduces the tube around the circumference, rapidly hammering the surface. It’s the best option for long tapers.
The alternative is positional or stationary swaging. Interestingly, there is only a single press stroke here rather than rotating and hammering the tube. As a result, it is best for producing short tapers. It’s important to choose the right tube swaging method for your project.
Limitations
Now you know more about the methods, let’s consider the limitations. Firstly, swaging is typically only suitable for the ends of tubing. It is harder to swage inner regions of the tube; you will need specialist tooling.
Secondly, deep reductions can be difficult, especially when you are dealing with thicker wall tubes, large diameters, and materials with lower formability. It can cause cracks or ruin the shape of the tube. The solution is to do multiple passes, typically with a rotary die. Each pass swages the tube a little, ensuring it remains within the forming limit each time.
Finally, it is important to note that swaging slightly alters the wall thickness at the end. Growth is natural here because the process does not remove material. While it is only a fraction of an inch, it can have an impact. You need to ensure it will be acceptable and won’t have a detrimental effect on things like fluid flow.
Get the most from tube swaging
Multiform Tubes Engineering Ltd has been providing swaging and other services like bending for a long time. We understand the advantages and limitations of the processes. As a result, we can provide the best results. Plus, we can work with a variety of materials, including steel, copper, aluminium, titanium, and more.
So, if you are considering tube swaging for any project, speak to us. We can advise you about the feasibility and potential challenges. Ultimately, we will help you to ensure it is the right option for you and will meet your specifications.
